H TYPE
Technical Data Model TS-48A-125 TS-36B-100 TS-36A-100 TS-24A-63 TS-24-63 TS-18-45
Items
Nominal Pressure kN 1250 1000 1000 630 630 450
Stroke Of Slide mm 40 40 40 40 40 40
Strokes S.P.M 150-250 150-250 150-250 150-250 150-250 150-250
Die Height mm 280-330 280-330 280-330 280-330 280-330 280-330
Side Lifting Height mm 100 100 100 80 80 80
Size of Table mm 2000×1400×130 2000×1200×130 1800×1200×140 1600×900×100 1400×900×100 1300×770×100
Bottom Size of Slide mm 1300×1350 1300×1150 1300×1170 1100×800 800×800 720×670
Width of Material mm 1080 820 820 550 550 400
Sucking Length mm 900 900 900 1000 1000 1000
Collecting Height Of Material mm 720 720 720 720 720 720
Inner Diameter Of Material Rolling mm φ150 φ150 φ150 φ150 φ150 φ150
Outer Diameter Of Material Rolling mm φ1200 φ1200 φ1200 φ1000 φ1000 φ1000
Speed Motor Power kW 22 18.5 18.5 7.5 7.5 7.5
Overall Dimensions
(L×W×Height)
mm 10000×4500×3800 10000×4500×3800 10000×4000×3500 7500×3500×3500 7500×3500×3500 7500×3000×3200
Total Weight kg 26000 22000 20000 12000 12000 9000
Remarks   Double Cranks Structure And The Cranks Are Installed From Front To Rear Double Cranks Structure And The Cranks Are Installed From Front To Rear Double Cranks Structure And The Cranks Are Installed From Front To Rear Double Cranks Structure And The Cranks Are Installed From Front To Rear Single Cranks Structure And The Cranks Are Installed From Front To Rear Single Cranks Structure And The Cranks Are Installed From Front To Rear
Mold Change Device/Initial Feeding Device   Optional Optional Optional Optional Optional Optional

>>BACK